Electric radiators & storage heaters
Innovation Meets Affordability
Choose your range

Standard
- Classic fluted design, only 7 cm deep
- 0.5–2.8 kW in standard, tall and low heights
- Choose from over 900 colours

Saxony
- Smooth, flat-fronted design
- Instant heat plus a patented smart, heat retentive core
- White or anthracite, only 7 cm deep

Dynamo S
- Charges on cheaper or solar power
- Up to 3 hours of stored heat
- Works with smart home and solar systems

Panel heaters, towel rails & care-home heaters
Compare the ranges
| Feature | Standard | Saxony | Dynamo S |
|---|---|---|---|
| Front design | Classic fluted front | Smooth, flat front | Fluted front, two-row storage |
| Depth | 7 cm | 7 cm | 12 cm |
| Heights | 63 cm, 124 cm (tall) or 34 cm (low) | 63 cm, 124 cm (tall) or 34 cm (low) | 63 cm |
| Output range | 0.5–2.8 kW | 0.5–2.0 kW | 0.5–1.5 kW per heating row |
| Heat storage | Patented heat retention smart core, up to 45 minutes after switch-off | Direct heating element plus a patented smart, heat retentive core | Two rows of storage bricks, up to 3 hours without power |
| Finishes | Over 900 colours | White or anthracite | White or anthracite |
| Thermostats | DSM, DSD, D-Basic or RF | DSM or DSD | Smart Control thermostat with a built-in Shelly relay |
| Best for | The widest choice of sizes and outputs | Modern interiors that suit a clean, flat look | Dynamic tariffs and homes with solar panels |
| View Standard → | View Saxony → | View Dynamo S → |
Heat Retention Smart Core

The detail
Our unique combination radiators are designed to store heat directly in the heat-retention tablets, without any loss of energy.
The metal ribs on the radiator form a six times greater surface area than a normal radiator, creating both radiant and convected heat for a much more consistent temperature throughout the room, from floor to ceiling.
The ribs are individually spot-welded, which prevents any noise during the heating-up and cooling-down cycle. When the radiator reaches its required temperature, the thermostat cuts the power.
The radiator then continues to provide heat stored in the heat-retention tablets for up to 45 minutes, with no further use of electricity.
The radiators use approximately 12–15 minutes of electricity per hour, depending on the building fabric and outside temperature.
The heating conductors are made from high-quality chrome-nickel steel (resistant to scaling up to 1,100 °C) and are moulded into the patented smart heat retention core, reducing the risk of corrosion.
The contacts inside the radiators are protected with heat-shrinkable insulated sleeves for optimum safety, and multiple thermocouples in each radiator provide overheat protection.
radTherm® 30-Year Guarantee
Built to last
30 years' peace of mind
5 years' free repair cover
We stand by our radiators
